Infusion Pump IP300
1. This infusion pump can used for adult, pediatric and neonatal
2. Available for any kinds of IV set
3. accuracy: 5%
4. CE
Specifications
1.Patient type: Adult, pediatric and neonatal
2.Driven mode: Electrical motor driving
3.Applicable IV set:
One specified IV set
Four specifications of ordinary IV sets
4.Flow rate: 1mL/h~1300mL/h
5.Preset volume range: 1mL~9999mL
6.Accumulated infusion volume display range: 1mL~9999mL
7.KVO (keep vein open):
1mL/h ≤flow rate ≤5mL/h, KVO rate is OFF
5mL/h <flow rate <50mL/h, KVO rate is 1mL/h
50mL/h ≤flow rate <300mL/h, KVO rate is 3mL/h
300mL/h ≤flow rate ≤1300mL/h, KVO rate is 5mL/h
8.Flow rate accuracy:
±5% (specified IV set)
±10% after calibration (ordinary IV set)
Product details
Storage & Operation Condition
Storage:
Temperature: -20~55°c
Relative humidity: ≤93%
Atmospheric pressure: 50KPa~106KPa
No exposed to corrosive gases, stored in well ventilated room
Operation:
Temperature: 5~40°c
Relative humidity: 20~90%
Atmospheric pressure: 70KPa~106KPa
Altitude: 4000m below
Dimension & Weight
Dimension: H245xD180xW170mm
Weight: ≤3kg
Accessories & Document
Power calbe
User Manual
Portable Ventilator SH100
Specifications
Pneumatically driven, pneumatically controlled
Patient type: Adult and Pediatric
Ventilation mode: IPPV
Additional function: Suction
Product details
Technical data
Minute volume: 3~20L/min, continuously adjustable
Breathing frequency: 10~35bpm, continuously adjustable
I:E: 1:1.5
O concentration: 100%/60%
Suction pressure: ≤-50KPa
Safe pressure max: ≤6KPa
Noise: ≤65dB (A)
Cylinder: 2L, time: ≥60Min (MV=8L/min, O2=60%)
Gas pressure: 0.3~0.6MPa (Flow ≥50L/min)
Standard Accessories
2L Cylinder
Expiratory valve
1L test bag
Mask
Suction tube and bottle
Carry bag
Silicon tube
Portable Emergency Ventilator Eternity SH210
Features
1. 5.6" TFT color screen
2.Microprocessor controlled system
3.Suitable for adult & pediatric
4.Convenient using
5.Use knob setting
6.PEEP, P-V loop, V-F loop
7.Three-level visual and audible alarm, with concise words describing problems
8.Can be used for emergency and emergency transport and ICU treatment
9.Durable and accurate built-in flow sensor
10.Integrated expiration valve, easy to be sterilized
11.Backup apnea ventilation
12.Auto nebulizer
13.Backup chargeable battery
14.Improve the breathing pattern
15.CE certified
Product details Specifications
Ventilator setting
1.Patient type: Adult & Pediatric
2.Driven mode: Gas driven electronically controlled
3.Working mode: pressure limited, time cycled, volume controlled
4.Setting: Electronic Knob
5.Ventilation mode: VCV, SIGH, SIMV+VCV, CPAP, SPONT
6.Waveform: P-T, F-T, V-T, P-V Loop, V-F Loop
7.Tidal volume: 0~1500ml
8.Breathing rate: 4~100bpm
9.I:E: 3:1~1:5
10.Trigger sensitivity: -2KPa~PEEP
11.PEEP: 0~2KPa
12.Oxygen: 50~100%
Alarms
1.Tidal volume, Airway pressure, Respiratory rate, Apnea, Power supply failure, Lack of oxygen pressure, Battery low
2.MV: Higher limit and lower limit
3.Pressure: Higher limit and lower limit
4.V: Higher limit, lower limit
5.Rate: Higher limit, lower limit
6.Apnea: Higher limit
7.FiO: Upper limit, lower limit
8.Loudness: 5 rating: 1,2,3,4,5
Environment requirement
1.Power: AC110~240V, 50~60Hz
2.Gas supply: Air & Oxygen pressure: 0.28~0.6MPa, <100L/min
3.Temperature: Operation -18~50°c; Storage -20~55°c
4.Relative humidity: Operation ≤80%, non-condensing; Storage ≤93%, non-condensing
5.Atmospheric pressure: Operation 50~106KPa
Accessories
Expiratory valve
Sampling tube
Flow sensor
Control of tracheal
O pipeline
Air pipeline
Silicone tube
Test lung
Weight and dimension
NW: 6.6kg
GW: 7kg
Dimension: H480xW260xD420mm
ICU Ventilator SH300
Features
· 10.4" TFT color screen
· Easy setting by navigator wheel knob and touch key
· Wide choice of ventilation modes including CPAP, APRV, BIPAP
· Flow and pressure trigger
· Static compliance and resistance monitor
· PEEP, P-V loop, V-F loop
· Three-level visual and audible alarm, with concise words describing problems
· Advanced built-in electronic air-oxygen mixing device
· Durable and accurate built-in flow sensor
· Integrated expiration valve, easy to be sterilized
· Backup apnea ventilation
· Auto nebulizer
· Built-in battery
· CE certified
Product details
Specifications
Ventilator setting
Ventilation mode: VCV, PCV, PSV, SIMV-V, SIMV-P, SPONT, CPAP, backup apnea ventilation, APRV, BIPAP (optional)
Tidal volume: 50~1500ml
Breath rate: 1~100bpm
SIMV breath rate: 1~40bpm
Inspiratory time: 0.1~12s
Pause time: 0~4.8s
Pressure trgger sensitivity: (PEEP-20cmH2O)~PEEPcmH2O
Flow trigger sensitivity: 1~20LPM
PSV: 0~70cmH2O
High pressure: 1~80cmH2O
Low pressure: 0~79cmH2O
Waveforms displayed: P-T, F-T, V-T, P-V loop, V-F loop
PEEP/CPAP: 0~50cmH2O
FiO2: 21~100%
Psupp: 0~70cmH2O
Pinsp: 5~70cmH2O
Thigh: 0.1~30s
Tlow: 0.5~30s
Phigh: 5~70cmH2O
Plow: 0~50cmH2O
Alarm silence: ≤120s
Parameters monitored: VTI, VTE, MV, MVspn, f, fspn, FiO2, Ppeak, Pmean, Pplat, PEEP, Pmin, Compliance, Resistance
Interface: RS232, VGA
Assist functions
Freeze: Freeze current screen and suspend real-time data
Insp hold: 15s max
Exp hold: 15s max
O2 suction: 100% O2 for 2 munites
Manual insp
Alarms
MV-upper limit: 0~99L
MV-lower limit: 0~99L
Paw-upper limit: 0.1~8KPa
Paw-lower limit: 0~7.9KPa
VTE-upper limit: 0.05~2.00L, OFF
Rate-upper limit: 0~100bpm
Rate-low limit: 0~99bpm
Tapnea: 15~60s
FiO2-upper limit: 21~100%
FiO2-lower limit: 21~99%
Main failure, Battery low, Battery discharged, Air/O2 supply down, Circuit occlusion
Power and environmental
Power: AC110~240V, 50~60Hz, DC 12V, 4.4AH
Power comsumption: 65VA
Driven mode: Pneumatically driven, electronically controlled
Air/O2 supply: Pressure 0.28~0.6MPa >50L/min
Temperature: Operation 10~40°c; Storage -20~55°c
Relative humidity: Operation ≤80%, non-condensing; Storage ≤93%, non-condensing
Atmospheric pressure: Operation 70~106KPa
Order information
Option: Compressor
Accessories: Power cord, Gas pipeline, Patient circuit, Face mask, Humidifier, Support arm
Anesthesia Machine Eternity AM852
Features:
1. Advanced anesthesia machine with high technology,support a variety of patients;
2. Suitable for neonate, pediatric & adult;
3. Meet low flow requirement by multi parameter monitoring;
4. Electronic flowmeter of high accuracy and intuitive displaying;
5. Integrated high temperature sterilization CO2 absorber system,excellent ergonomic breathing circuit,with heating and bypass function;
6. Safe & reliable gas system
7. CE marked, meet EU clinical requirement
Product details
Technical Specification
Physical & Environmental Specification
. Dimensions (WxHxD): 600x1368x740mm
. Weight: 130kg
. Storage temperature: -10~+60
. Working temperature: +10~+40
. Storage humidity: 15%~90%
Electrical Specification
. Mains: 100-240VA C, 50-60Hz
. Battery: 24VDC, minimum120min
Pneumatic Specification
. Gas supply: AIR, O2, N2O: 0.28-0.6Mpa
. Flowmeters: Electronic flowmeter
.Gas supply: O2 deficiency alarm
.Hypoxic guard system
. O2flush: 25-75L/min
. Working mode: Closed, Semi-closed, Semi-open
. Driven mode: Pneumatically driven and electronically controlled
. Operating mode: Man. / Vent.
Ventilator Specification
. Patient type: Adult, pediatric & neonate
. Ventilation modes: VCV,PSV,PCV,SIMV,Standby, Manual
. Setting: Touch key & navigator wheel knob&touch screen
. Tidal volume: 20-1500ml
. Ventilation frequency: 0-100bmp
. I:E ratio: 10:1-1:10
. Pressure control: 5-70cmH2O
. Ppeep: 0-40cmH2O
. Inspiratory plateau: off, 0-60%Ti
. Trigger sensitivity: Flow and pressure trigger
. High pressure: 20-100cmH2O
. Low pressure: 0-20cmH2O
. Monitoring: Display: 12TFT color touch screen
Pressure: Paw, Ppeak, Pplat, Pmean
Volume: MV, Vt
Flowmeter
Vaporizer agent
Breath rate
Gas: FiO2
Compliance
Graph display: P-T, F-T, V-T waveforms & P-V, F-V loops. Waveform frozen
. Alarm: Pressure: Paw, high/low limit
Volumes: TV/MV high/low limit
High limit of breath rate
Gas: FiO2 high/low limit
Apnea
Airway pressure high
High PEEP level
Power failure
Battery low
Low O2 supply pressure
Vaporizer
. Support 2 vaporizer (Selectatec compatible)
. Agent type: Halothane, Enflurane, Isoflurane, Sevoflulrane available.
Optional
EtCO2&SpO2 module
AGSS
Anesthetic gas module
Anesthesia Machine AM834
Features
- More accurate
- Safer and more convenient
- CE marked, meet EU clinical requirements
- ISO quality guarantee
- Suitable for adult and pediatric
- Option Pin-Index for NO/O Cylinder
Product details Specifications
Physical and Environmental Specification
1.Demension: L600xW740xH1368
2.Storage temperature: -22°c~+55°c
3.Working temperature: +10°c~+40°c
4.Storage humidity: ≤93°c
Electronic Specification
1.Power supply: AC100~240V±10%, 50/60Hz±1%
2.Battery: 2.5~4 hours
3.Power consumption: ≤75VA
4.Top light
Pneumatic Specification
0~1L/min, 1~10L/min
flush: 25~75L/min
Working mode: Closed, Semi-closed, Semi-opened
APL valve: ≤6KPa
NO cut off: O pressure lower than 0.1MPa
concentration
Waveform: P-T, F-T
Loop: F-V, V-P
Alarm
1.Airway pressure limit
2.O2 concentration
3.Apnea
4.Tidal volume
5.Minute volume
6.Respiratory rate
7.Power supply failure
8.Battery low
Anesthesia Machine AM832-A ( Available for 2 Vaporizers )
Features
- More accurate
- Safer and more convenient
- CE marked, meet EU clinical requirements
- ISO quality guarantee
- Suitable for adult and pediatric
- One selectatec BE700 vaporizer
- 5.6 inch TFT Full-color display
Specifications
- Physical and Environmental Specification
- Demension: L630xW677xH1365
- Storage temperature: -22°c~+55°c
- Working temperature: +10°c~+40°c
- Storage humidity: ≤93°c
Electronic Specification
- Power supply: AC100~240V±10%, 50/60Hz±1%
- Power consumption: ≤75VA
- Top light
Product details
Pneumatic Specification
1. Gas supply: O2/N2O, 0.28MPa~0.6MPa
2. Flowmeters:
O2: 0~1L/min, 1~10L/min
N2O: 0~1L/min, 1~10L/min
Four tube flowmeter, 0~10L/min (With interlock protection devices ensuring the
oxygen concerntration > 21%
3. O2 flush: 25~75L/min
4. Working mode: Closed, Semi-closed, Semi-opened
5. APL valve: ≤6KPa
6. O2 supply trouble alarm: O2 pressure lower than 0.14MPa
7. N2O cut off: O2 pressure lower than 0.1MPa
8. Back light for flowmeter
Vaporizer
- Support one vaporizers (Selectatec compatible)
- Agent type: Sevoflurane, Halothane, Isoflurane available
- Flow range: 0.2~15L/min
- Concentration: 0~5% (Sevoflurane 0~8%)
- Working temerature: 15~35°c
Anesthesia Machine AM831
- Anesthesia ventilator
- Patient type: Adult, pediatric
- Driven mode: Pneumatic control electrical control
- Display: 4.2" TFT color display
- Ventilation mode: IPPV, STANDBY,SIGH,Manual
- Tidal volume: 50mL to 1500mL
- Respiratory frequency: 6 to 60bpm
- I:E ratio: 1:1 to 1:4
- Upper airway pressure limit: 1 to 8kPa
- Lower airway pressure limit: 0 to 2kPa
- Tidal volume: 50mL to 1500mL
- Silence time for alarm: ≤ 120s
- Monitoring parameters: Tidal volume, Respiratory frequency, Airway pressure
- Alarm parameters: Airway pressure limit, oxygen supply failure,Power supply failure
- Safety valve pressure limit: ≤ 6kPa
- Power supply: AC 220V ± 10%, 50Hz ± 1%
Product details
- Vaporizers:
- One BE500 vaporizer
- Flow range: 0.2 to 15 L/min
- Concentration: 0 to 5.0%
- Agent: Enflurane,Halothane,Sevoflurane,Isoflurane
- Option:Selectatec mounting system vaporizer BE700,BE800
Main unit:
- Mode: Semi-open, semi-closed or closed system
- Gas supplies: O2/N2O 0.3MPa to 0.6MPa
Anesthesia Machine AM831
- Anesthesia ventilator
- Patient type: Adult, pediatric
- Driven mode: Pneumatic control electrical control
- Display: 4.2" TFT color display
- Ventilation mode: IPPV, STANDBY,SIGH,Manual
- Tidal volume: 50mL to 1500mL
- Respiratory frequency: 6 to 60bpm
- I:E ratio: 1:1 to 1:4
- Upper airway pressure limit: 1 to 8kPa
- Lower airway pressure limit: 0 to 2kPa
- Tidal volume: 50mL to 1500mL
- Silence time for alarm: ≤ 120s
- Monitoring parameters: Tidal volume, Respiratory frequency, Airway pressure
- Alarm parameters: Airway pressure limit, oxygen supply failure,Power supply failure
- Safety valve pressure limit: ≤ 6kPa
- Power supply: AC 220V ± 10%, 50Hz ± 1%
Product details
- Vaporizers:
- One BE500 vaporizer
- Flow range: 0.2 to 15 L/min
- Concentration: 0 to 5.0%
- Agent: Enflurane,Halothane,Sevoflurane,Isoflurane
- Option:Selectatec mounting system vaporizer BE700,BE800
Main unit:
- Mode: Semi-open, semi-closed or closed system
- Gas supplies: O2/N2O 0.3MPa to 0.6MPa
